Get Social

Stock Car Convertible Bed

Easily converts from toddler to twin bed!

Have your children racing for bed with a Stock Car Convertible Bed! Bedtime is fun when your children can climb into a bed modeled after a stock car, and since it converts to fit a twin mattress, they can use their Stock Car Convertible Bed for years to come. Made in USA.

  • Bed can be configured to accept either a crib or a twin-size mattress (mattresses and bedding not included)
  • Toddler configuration includes molded-in race track near footboard for die cast vehicle play (cars not included)
  • High center side rails help child feel more secure
  • Genuine sponsor decals included for custom application (decals may vary)
  • Maximum weight for Toddler Bed: 50 lbs
  • Maximum weight for Twin Bed: 200 lbs
  • Minimal adult assembly required
  • Get the whole set and save with the Racing Room Combo
  • Check out the bed featured on TLC
  • Adult assembly required
  • Also available as a bedroom combo
Recommended Age: 2 and up
Product Number: 743400
Dimensions: 23.63 H 49.25 W 89.50 D
Weight: 120.00 lbs
Add the Stock Car Convertible Bed to your shopping Cart
$314.99 $299.99 + $29.99 Shipping
Reg. $314.99
$299.99
+ $29.99 Shipping Add the Stock Car Convertible Bed to your Cart
Is this a gift?
Don't spoil the surprise!
This item ships with an image of the product on its outer packaging.
Made in USA 3 Year Warranty
Find in local stores

REVIEW SNAPSHOT®

by PowerReviews
Step2Stock Car Convertible Bed
 
4.7

(based on 73 reviews)

Ratings Distribution

  • 5 Stars

     

    (50)

  • 4 Stars

     

    (21)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

97%

of respondents would recommend this to a friend.

Pros

  • Comfortable (58)
  • Fun (53)
  • Bright colors (45)
  • Easy to clean (45)
  • Durable (24)

Cons

    Best Uses

    • Toddler (50)
    • Young children (39)
    • Primary bed (14)
    • Pre-teens (3)
      • Reviewer Profile:
      • Practical (25), Budget shopper (23), Midrange shopper (23), Stylish (12), High-end shopper (9)
      • Was this a gift?:
      • No (8), Yes (4)

    Most Liked Positive Review

     

    My son just LOVES this bed!!

    I bought this bed in 2007 after my son (2 years old at the time) had a difficult time transitioning from the crib to a small toddler bed that I had previously bought....Read complete review

    I bought this bed in 2007 after my son (2 years old at the time) had a difficult time transitioning from the crib to a small toddler bed that I had previously bought. He would sneak into our room after we were fast asleep and end up sleeping the night with my husband and me. We would wake up every morning and discover that he was once again in our bed instead of his. So we decided that he would probably sleep better in a bigger bed. While shopping for a bigger bed for our toddler to sleep in, we saw this bed and brought it home. We assembled it and realized that we would need our power tool to get some of the screws in, which wasn't a big deal to us (meanwhile he was taking a nap in our bed). From the first time my son saw this bed in his room, he was elated. From that first night we had this bed in his room, he has slept peacefully in it. This was a relief since we did not have to wake up with little feet in our aching backs. My son will be 5 in september and he loves this bed. We had to transition from the toddler mattress to the twin mattress (at the end of 2009) because he had gotten to tall for the toddler mattress. He loves it even more, even without the race track for him to play with. It is now his big boy bed and he even makes his bed up everymorning. This is a great buy! I don't even mind using a power tool to assemble it. It's not some flimsy peice of plastic. We are military and we have assembled and disassembled this bed plenty of times and it is stil just as sturdy as when we first had gotten it. A very happy customer with this Step2 product.

    VS

    Most Liked Negative Review

     

    Uncommon twin mattress height needed.

    Got this when my son was three. He loves it. The stickers look great and he's added more so it's more his bed. We used it with a toddler mattress. We did have...Read complete review

    Got this when my son was three. He loves it. The stickers look great and he's added more so it's more his bed. We used it with a toddler mattress. We did have issues with the gaps on the sides of the crib mattress. We used rolled blankets or stuffed animals to fill in the sides. Another downside is that now that he's moving to the twin size mattress, I can't find one with the required height of only 7". All of the innerspring mattresses I've looked at are eleven or twelve. The mattress companies I've spoke with said they don't even make them that thin. It should say that it requires a bunk bed mattress. That or redesign it to fit common mattress heights. If I had known the 7" height req, I would have gone with something else.

    Reviewed by 73 customers

    Sort by

    Displaying reviews 1-5

    Back to top

    Previous | Next »

    (1 of 1 customers found this review helpful)

     
    5.0

    So happy with my purchase

    By Kendra M.

    from Seattle, Wa

    About Me Midrange Shopper

    Verified Buyer
    new-bee

    Pros

      Cons

        Best Uses

        • Toddlers
        • Young Children

        Comments about Step2 Stock Car Convertible Bed:

        I bought this bed for my son at age 20 months. It is his first bed after his crib.

        What I love about this bed
        - it fits Both a toddler and twin mattress so he can continue to use this bed as he grows
        - it has a built in railing system due to the design of the car so he never rolls out of the bed at night
        - he loves it! He is so excited to go to bed at bed time and nap time. He sleeps really well on it every night since the first night we got it
        - bonus- my son can get in and out of the bed on his own, but it is a little challenging since the bed is large, therefore he waits for me to give him the ok to get out of bed every morning instead of getting out and wandering the house on his own :)

        Challenges with the bed
        - it is a big bed, definitely take measurements to ensure it will fit your child's room before you buy.
        - make sure you have someone there to help you get the bed from the delivery truck into the house, your husband, a dolly, a buff friend or neighbor. The box the bed comes in is between 120-130lbs
        - you have to assemble the bed and all of its design stickers, which was actually a really fun process

        Also, buying directly from the manufacturer was the cheapest I could find this bed new, others had the bed for cheaper, but charged over $100 for shipping.

        • Was this a gift?:
        • No

        Comment on this review(earn buzz points)

        (3 of 3 customers found this review helpful)

         
        5.0

        After 5 years, we still love these!

        By lovemy4

        from Wilmington, Nc

        About Me High-end Shopper

        Pros

        • Bright Colors
        • Comfortable
        • Easy To Clean
        • Fun
        • Sturdy

        Cons

          Best Uses

          • Toddlers
          • Young Children

          Comments about Step2 Stock Car Convertible Bed:

          I never write reviews but really like these beds. My twins have had these beds since they were 24 months and crawling out of their cribs. The raised edges act like side rails so they feel safe, smooth edges so no injuries while wrestling around the room. But are still cool when they are 7. Even though they are plastic, they are super sturdy and have held up through a move and 5.5 years of 3 boys jumping on them. I was beyond impressed with these.

          • Was this a gift?:
          • No

          Comment on this review(earn buzz points)

          (1 of 1 customers found this review helpful)

           
          5.0

          Love It!!!

          By micah's mommy

          from Spokane, WA

          About Me Midrange Shopper

          Verified Buyer

          Pros

          • Bright Colors
          • Comfortable
          • Easy To Clean
          • Fun

          Cons

            Best Uses

            • Toddlers

            Comments about Step2 Stock Car Convertible Bed:

            the only con to the bed is that my son wants to put it in the garage with his mommy's car!!

            • Was this a gift?:
            • No

            Comment on this review(earn buzz points)

            (3 of 4 customers found this review helpful)

             
            5.0

            2 Beds for the price of ONE

            By Korbikiss

            from NJ

            About Me Budget Shopper

            Verified Buyer
            new-bee

            Pros

            • Bright Colors
            • Comfortable
            • Easy To Clean
            • Easy to put together
            • Fun

            Cons

            • HUGE Box

            Best Uses

            • Toddlers
            • Young Children

            Comments about Step2 Stock Car Convertible Bed:

            We wanted to get a twin size bed for my little toddler. He is 2 years old. We were giving away his crib to someone else who needed it. This bed was the perfect answer to giving my son a cute little bed. The cost of a regular twin size bed was in the same price range. The plus side to this bed was it's ability to accommodate a toddler / crib size mattress. We did not have to run out and purchase a twin mattress right away. We will wait until the toddler mattress can no longer be used. So the only expense we had was the bed itself. It came in a HUGE box. At first glance it looked to be fully assembled and we were worried how to get it up the stairs in our small cape house. Once we opened the box we found it had to be put together. The bed is colorful and fun and very sturdy. The little racetrack on the end of it is really cute. I tend to shop around a goof bit for the bet prices and surprisingly it was the best deal from the manufacturer direct. Other places although advertised for cheaper, charged over 100.00 for the shipping and handling. I had a coupon online for free shipping from this site and the shipping was only 25.00 as opposed to the other places which charged an arm and a leg. Do not be fooled. Buy straight from here. Hope this helps. My son loves his bed! I think my son will love this bed and have it for many years. At least another 10 years. Put it this way. My almost 13 year old son wanted it too! :)

            • Was this a gift?:
            • No

            Comment on this review(earn buzz points)

             
            5.0

            Great Bed!!

            By leelee

            from WI

            See all my reviews

            Verified Buyer

            Comments about Step2 Stock Car Convertible Bed:

            Very sturdy and awsome colors.

            Comment on this review(earn buzz points)

            Displaying reviews 1-5

            Back to top

            Previous | Next »

            Stock Car Convertible Bed
            Already Asked: 13 Questions, 40 Answers
            Sort by:
            Step2.com Store asked: Why did you choose this?
            Kathleen W: Grandson loves NASCAR racing. He will be 3 in Dec and is crawling out of crib. Think he will love this and really feel like a big boy. Nov 4, 2014
            Johnny B: because it is a 2step from toddler to child... and I like the looks and the reviews I read on it Jul 5, 2014
            Ira F: Grandson is huge race car fan. This bed made transition from crib to bed easy. Apr 10, 2014
            Elmer C: I like the fact that it goes from toddler to twin Dec 23, 2013
            Dianne M: Grandson liked it Sep 17, 2013
            katy k asked: How do you convert it from a toddler bed to a twin? Apr 7, 2013
            Answer this · Send to friends Good question? Yes (1) No (0)
            Allison C: The directions that came with the bed show you how to convert it. You can also download them again right from the Step2 site. You have to remove the "head" of the bed and pull out the wood boards and place them on top of the frame in order for it to support a twin size mattress. It was fairly easy to do. Apr 7, 2013
            Reply to Allison Good answer? Yes (2) No (0)
            Ziyad T: First of all, you need to remove all screws at the back and remove the back part. Then you install the racing track in the middle and both wooden plank on each side. Put back the back part. Thats it. Apr 7, 2013
            Reply to Ziyad Good answer? Yes (2) No (0)
            Nike B: I havent tried it yet but I think the instructions are on the website or in the instruction manual it came with. Apr 8, 2013
            Reply to Nike Good answer? Yes (1) No (0)
            Kristine G: We just took the toddler mattress off and placed the twin bed where the toddler bed went. It's been like that for about 3 weeks now. This is what I was told when I called toys r is since they sell the same bed. If its incorrect please let us know as well. Apr 7, 2013
            Reply to Kristine Good answer? Yes (0) No (0)
            katy k: We did that too when we first changed mattress size but as my son has gotten older the mattress seems to sag with his weight & he says his back hurts. We just fixed it the correct way and it seems to not be sagging in more hopefully this will also help his back because he loves this bed! Apr 9, 2013
            Kristine G: How do you fix it the correct way so that we can do that? What did you out down under the mattress Apr 9, 2013
            katy k: Thank You everyone that answered! I found the instructions online, I knew part of it had to come apart but I wasn't sure how the boards were suppose to go. We had them wrong of course maybe that is why the mattress seemed to be sagging where my son slept. Apr 9, 2013
            Reply to katy Good answer? Yes (0) No (0)
            ryan r asked: I bought one of these used for my child and it was missing the boards to support the mattress. Does anyone know the size of the boards, thickness, and material that it is made out of?

            thank you
            May 22, 2013
            Answer this · Send to friends Good question? Yes (1) No (0)
            Margaret G: It is the size of the inside of the bed without the mattress, it is press board--probably about a 1/2 inch thick. But I will have to measure to get the dimensions right. Will do that this weekend and send an up-date. May 23, 2013
            Reply to Margaret Good answer? Yes (0) No (0)
            aussie G: hi ryan I see you had the same problem as me I am a grandma looking after my 2 yo grandson full time when you say you used 1/2 inch 29"x 37" need t 2 boards can you tell me what material the boards were? Aug 4, 2013
            Reply to aussie Good answer? Yes (0) No (0)
            ryan r: I just used particleboard. It seems to be working, and it was the least expensive. Aug 4, 2013
            aussie G: Brilliant thankyou so much will give it a go appreciate your reply Aug 4, 2013
            ryan r: thank you so much. hoping to get what I need to make my little guy happy this weekend. May 23, 2013
            Reply to ryan Good answer? Yes (0) No (0)
            ryan r: I figured this out... I used 1/2 inch 29" x 37" you need two of them. Jun 10, 2013
            Reply to ryan Good answer? Yes (0) No (0)
            A shopper asked: what size mattress goes in, is there different size twin mattresses, the one we bought, doesn't seem to fit?!!? any advice? Apr 14, 2013
            Answer this · Send to friends Good question? Yes (1) No (0)
            Shellini S: Hi! We used a twin size mattress that we bought from Costco / BJ wholesale. For several months before we bought the twin size mattress we used the same mattress from his crib and he played with the "racetrack" part of his bed. I wish I had exact measurements. But if you are able to go onto the BJ website I am pretty sure they will have their mattress size listed on there. :-). Hope this helps. I know we are using twin size bed sheets and NOT the XL twin size. Aside from that we have had the bed for 18 months and he loves it and we do too. It is one very well made solid piece. Apr 15, 2013
            Reply to Shellini Good answer? Yes (0) No (0)
            Margaret G: We purchased the bed for our grandson last year and bought the twin size foam mattress from Amazon. The foam mattress is about 39 X 75 X 6 and works very well with it. Our daughter loves that the foam mattress doesn't rebound the way a spring mattress would so Marcus can jump on the bed without it being a trampoline. PS Marcus loves his bed and his dad says that it's really comfortable. In fact, Daddy went to sleep on the bed reading a bedtime story - Marcus came out to his mom to complain that "Daddy is in my bed and won't get out!" Apr 17, 2013
            Reply to Margaret Good answer? Yes (0) No (0)
            Marcus Da Briel C: We have used two different twin mattresses, the first one fitted tighter than the one we are currently using. I do not have the dimensions of the first, but the one we are using now measures 36"x72". The fit is good it just higher than the one we used first. The twin mattresses vary according to the make and brand, what we are using now is a Serta. Apr 15, 2013
            Marcus Da Briel C: We have used two different twin mattresses, the first one fitted tighter than the one we are currently using. I do not have the dimensions of the first, but the one we are using now measures 36"x72". The fit is good it just higher than the one we used first. The twin mattresses vary according to the make and brand, what we are using now is a Serta. Apr 15, 2013
            Brigette M asked: Is there any easy way to remove the stickers from the plastic surface? May 3, 2014
            Answer this · Send to friends Good question? Yes (0) No (0)
            Catherine P: When you purchase the bed the stickers are not on there, you put them on yourself (or not.) May 5, 2014
            Reply to Catherine Good answer? Yes (0) No (0)
            Mary E: I would try "Goof Off". It removes adhesive easily. Hope this helps :-). May 5, 2014
            Reply to Mary Good answer? Yes (0) No (0)
            Lauren A: We took off some of our stickers with no problem. Just have to be gentle. May 5, 2014
            Reply to Lauren Good answer? Yes (0) No (0)
            melanie b: Sorry. Wish I could help. But I didn't put the stickers on. May 5, 2014
            Reply to melanie Good answer? Yes (0) No (0)
            A shopper asked: What is the bed made of? What parts are wood, what parts are plastic? Are there other materials? Sep 4, 2013
            Answer this · Send to friends Good question? Yes (0) No (0)
            Shellini S: All parts are plastic. The only part that is wood is the wooden plank that sits in the well of the bed in order to hold / support the mattress. You never see the wood part unless you are picking up the mattress to flip it over. The whole shell of the bed is a nice heavy hard plastic. We are still using this bed for my now 4 year old son. It has held up awesome. It also comes with stickers to decorate the bed. HTH. Sep 5, 2013
            Reply to Shellini Good answer? Yes (1) No (0)
            Margaret G: The racing car bed is hard plastic - has survived our 4 year-old grandson for over a year and still looks new. The base holding the mattress is plywood cut in inner shape of the bed to support the foam mattress we bought separately. (Buy foam not springs - prevents the trampoline effect.) Sep 5, 2013
            Reply to Margaret Good answer? Yes (0) No (0)
            Mary E: The entire bed is plastic. I bought one for my grandson. He has never used it. I'm going to sell it. He still seeps with his Granny.....lol. It's an awesome bed! I have the toy box and the dresser also. Hope this helps. Sep 6, 2013
            Reply to Mary Good answer? Yes (0) No (0)
            Step2Staff: This kids bed is make primarily of plastic, with the exception of the boards, which are made of MDF pressed wood. Sep 5, 2013
            Reply to Step2 Good answer? Yes (0) No (0)
            marianne m asked: Anyone use this w a twin size mattress AND box spring? May 12, 2013
            Answer this · Send to friends Good question? Yes (0) No (0)
            Susan R: Hi Marianne,

            I am using this with only a twin size mattress.

            I definitely do NOT recommend using this with a box spring. There is not enough depth within the "car frame" to stack a mattress on top of a box spring and have it look nice. Looking at the picture on the website, the height of the mattress is based on the mattress sitting on the support with NO box spring.

            It works fine for us without a box spring.

            We are very happy with this bed.

            Hope this helps!
            May 13, 2013
            Reply to Susan Good answer? Yes (1) No (0)
            Margaret G: We bought a twin foam mattress which is perfect - and our grandson can jump on the bed without it being like a trampoline (foam absorbs the jump and springs allow rebounds that can get scary with an active 4 year old.) May 23, 2013
            Reply to Margaret Good answer? Yes (0) No (0)
            Jennifer I: We have just the mattress and it fits perfectly in the bed if you added the box spring the whole mattress would be above the car. May 13, 2013
            Reply to Jennifer Good answer? Yes (0) No (0)
            Mary E: The mattress that fit my grandson's bed was actually the mattress from our loveseat sleep sofa! It fits perfect! May 13, 2013
            Reply to Mary Good answer? Yes (0) No (0)
            A shopper asked: When receiving this product, did you only receive one page of the stock car logo sheets? We only received the one and it's only enough stickers to fit on one side of the bed (if assembling as shown in the picture). May 28, 2014
            Answer this · Send to friends Good question? Yes (0) No (0)
            Step2Staff: It seems as though you are missing some decals for this bed. Please call us at 1-800-347-8372 Monday - Friday, from 8-5 ET so we can arrange shipment of the needed parts. May 29, 2014
            Reply to Step2 Good answer? Yes (0) No (0)
            Nancy B: Yes, only we also only received enough to cover one side of the car if we placed them as pictured. We chose to put one on one side of the car. Jun 11, 2014
            Reply to Nancy Good answer? Yes (0) No (0)
            NEBIYOU A: everything is good but IS hard to find the mattress Jun 6, 2014
            Reply to NEBIYOU Good answer? Yes (0) No (0)
            A shopper asked: When the bed is un-assembled, will the pieces fit in a car for transport? Oct 28, 2014
            Answer this · Send to friends Good question? Yes (0) No (0)
            Tamara S: Some of the pieces are very large when un-assemled. They would probably fit in a SUV, but not an average size sedan. Nov 13, 2014
            Reply to Tamara Good answer? Yes (0) No (0)
            Step2Staff: No, the unassembled parts Stock Car Convertible Bed will not fit inside most cars. Nov 5, 2014
            Reply to Step2 Good answer? Yes (0) No (0)
            estrellitas c asked: Can this bed be used as a playing area when the matress and wood boards are removed? Is it safe for kids to play in it when they out grow it? Aug 28, 2014
            Answer this · Send to friends Good question? Yes (0) No (0)
            Mary E: I'm not sure. It's been awhile since I removed the board or the mattress. I can tell you this.......IT IS WELL WORTH THE MONEY! This bed has withstood jumping on the regular basis by my 4 year old grandson! He loves it! Sep 2, 2014
            Reply to Mary Good answer? Yes (0) No (0)
            David Y: When the child out grows they bed they will be too big to play in the frame. This bed is large enough for a 6 foot adult to sleep in comfortably (with the right matress of course). Sep 2, 2014
            Reply to David Good answer? Yes (0) No (0)
            nikki g asked: My son had grown out of the bed, dont have instructions and I dont know how to take apart to remove from his bedroom, please help? Jun 13, 2014
            Answer this · Send to friends Good question? Yes (0) No (0)
            Step2Staff: Please follow the assembly instructions in reverse order to disassemble this bed: http://images.step2.com/media/pdfs/743400_assembly.pdf Jun 16, 2014
            Reply to Step2 Good answer? Yes (0) No (0)
            Trisha J asked: What's the size of the box this is shipped in? May 1, 2014
            Answer this · Send to friends Good question? Yes (0) No (0)
            Step2Staff: This car bed is shipped in a 39" x 73.75" x 25.75" carton. May 2, 2014
            Reply to Step2 Good answer? Yes (0) No (0)
            aussie G asked: Hi I have been given a step 2 racing car bed but there are no support boards for the mattress can you tell what the dimensions are & what sort of board I should buy? Aug 4, 2013
            Answer this · Send to friends Good question? Yes (0) No (0)
            Step2Staff: You can purchase these through our Customer Service Department. Please call toll free 1-800-347-8372 Monday - Friday, from 8-5 ET and we will be happy to assist you with this request. Aug 5, 2013
            Reply to Step2 Good answer? Yes (1) No (0)
            asdfasd
            Step2 Logo

            Welcome to Step2.com!

            Your opinion is important to us.

            After your visit, would you be willing to answer 5 quick questions?

            Click the "Yes" button below to continue your visit as intended*. When done, retrieve the window remaining on your desktop and complete the brief questionnaire.

            YesNo

            Thank you for your help!

            *A second window will open on your desktop if you click "Yes". Please make sure not to close that window if you wish to participate.